Platform

One platform from the sensor to the decision.

Place Performance brings together proven sensing hardware, local installation and support, and an analytics and AI platform. You get trustworthy numbers from day one and the intelligence to act on them.

Place Performance site dashboard with live occupancy, floor stack and satellite map

How it works

Four layers, delivered as one service.

1. Sensors

3D people counters at entrances and in spaces, plus specialist sensors for cyclists, vehicles and outdoor areas.

2. Edge processing

Counting happens on the device and data is masked at source. Only anonymous counts are sent onward.

3. Analytics platform

Live occupancy, floorplans, trends, benchmarking, alerts and reports across every site, space and zone.

4. AI insight

Forecasts, scenario planning, ranked recommendations and a Place Assistant you can ask in plain English.

The sensor

How the counting actually works.

The main counting sensor fits to the ceiling and looks straight down. Rather than recording faces, it builds a 3D depth view of the space below and reads the shape and height of each person passing through, so it counts precisely without ever identifying anyone.

3D depth sensing

Twin wide-angle lenses give the sensor a real sense of depth, so it counts people by shape and height from above, not by their faces. A single unit covers a whole entrance.

Counting on the device

A dedicated AI processor inside the unit turns what it sees into counts on the spot. Only anonymous numbers ever leave it — no images are streamed or stored.

Learn more

Accurate in the real world

Up to 99.8% counting accuracy, held steady through busy crowds, shadows and low light, in the conditions real entrances throw at it.

Staff and groups understood

On-device AI can set staff apart from visitors and recognise groups, so the numbers reflect the people you actually want to measure.

One cable to fit

A single network cable carries both power and data, so a unit goes in quickly and cleanly with little disruption to the space.

Built to keep running

A sealed, dust-resistant metal housing with a toughened glass lens is made for years of continuous, unattended operation.

Animated illustration of a 3D people counter above a doorway counting people in and out3D people counterIN +1OUT +1IN +1In today1,284Out today1,197
Entrance counting: people in and out, processed on the device.

Hardware included

We start with your question, not with a device.

Every place is different. Before anything is installed, our team assesses the environment, movement patterns, coverage, connectivity, power and privacy needs, then selects the technology that fits.

  1. Assess. What do you need to understand, and where? Entrances, floors, rooms, paths, roads or open spaces.
  2. Select. 3D people counters for entrances and areas, plus specialist sensors for cyclists, vehicles and outdoor spaces.
  3. Install and commission. Designed, supplied, installed and calibrated by our Australian team, permanent or temporary.
  4. Support. Every device reports a heartbeat. Local experts keep the system accurate and expand it as your needs change.

One service

Proven hardware, local expertise and an intelligent platform, delivered together.

Proven hardware

3D people counters

Commercial-grade 3D sensors with all processing on the device and no personal data collected, plus specialist sensors for cyclists, vehicles and outdoor spaces.

How counting stays anonymous
Local expertise

Australian team

We survey, design, install, calibrate and support every deployment, from the first site visit to ongoing maintenance and expansion.

How we deliver
Intelligent platform

Place Performance

Real-time dashboards, live floorplans, alerts, reporting, forecasting and AI insights across every site, space and zone.

Try the live demo

Capabilities

Everything you need to measure, understand and act.

Reporting

Reports that run themselves

Weekly visitation summaries, monthly capacity reports and device health, scheduled to the right inboxes. Board-ready executive packs are generated each quarter.

Weekly visitation summary report
Device health

Data you can trust

See every sensor on your floorplans with its live status. When a device goes quiet you are alerted, and the support team is already on it.

Device record showing a 3D people counter located on the floorplan

Guide

What is a people counting and place analytics platform?

A people counting platform turns raw sensor counts into answers about how a place is used. Place Performance goes further than a dashboard. It covers the whole chain, from choosing and installing sensors to reporting, forecasting and AI recommendations, so the numbers you rely on are trustworthy from the first day.

From sensor to decision

Every deployment starts with a site survey. Our team looks at entrances, ceiling heights, lighting, movement patterns, power and connectivity, then designs a sensor plan. Indoors that usually means 3D people counters at entrances and over key zones. Outdoors it can include specialist sensors for pedestrians, cyclists and vehicles. Counting happens on the device, so only anonymous numbers are sent to the platform, as explained in privacy by design.

Organised the way you manage places

Data is structured as portfolio, site, space and zone. A council can see every library at once, then drill into one branch, one floor and a single children's area. Visits, live occupancy, dwell time and peak periods roll up automatically, so a regional manager and a branch manager look at the same numbers at different levels of detail. Live floorplans show each zone filling and emptying as it happens.

Insight, not just information

Dashboards tell you what happened. The platform also tells you what to do about it: threshold alerts before a room overflows, scheduled reports for managers and boards, visitation forecasts, scenario planning and a Place Assistant that answers questions in plain English. Capabilities are packaged into four plan levels, so you can start with counting and add intelligence when your organisation is ready.

Built for Australian public and shared places

The same platform serves councils, universities, government agencies, commercial buildings, shopping centres and outdoor public spaces. Each sector uses the same trusted data for different decisions, from crowd safety in a library to consolidating floors in an office tower.

FAQ

Questions & answers

What hardware does Place Performance use?

Place Performance uses commercial-grade 3D people counters for entrance and in-space counting, plus specialist sensors for cyclists, vehicles and outdoor areas where needed. Our team selects the right technology for each environment after assessing it.

Who installs and supports the sensors?

Place Performance designs, supplies, installs, commissions and supports the complete measurement system in Australia, from the initial site survey through to ongoing maintenance and expansion.

Does it work outdoors?

Yes. Deployments can be indoor or outdoor, permanent or temporary, covering buildings, venues, parks, trails, streets and public spaces, including pedestrian, cyclist and vehicle counting.

What systems does it integrate with?

It connects to point-of-sale, Wi-Fi analytics, building management systems, GIS, parking and ticketing platforms. Integrations are configured for you, and you control settings such as sync frequency and which data feeds reports.

Can I see data for a single room as well as a whole portfolio?

Yes. Data is organised as portfolio, site, space and zone, so you can drill from all your locations to one building, one floor and a single room, with every metric rolling up automatically.

How accurate is the data?

Accuracy depends on the sensor and environment, which is why each location is assessed and each device is calibrated during commissioning. Device health monitoring flags drift or outages so data quality stays high.

See your places in a new light.

Book a 30-minute walkthrough and we'll scope a pilot for one of your sites: sensors, installation, software and insights in one agreement.